Epson WorkForce AL-MX200DNF

Values:
Plain
0
*
-3 - 3
Light Card
0
*
-3 - 3
Labels
0
*
-3 - 3
Recycled
0
*
-3 - 3
Envelope
0
*
-3 - 3
Postcard
0
*
-3 - 3
*
Factory default menu setting
Adjust Fusing Unit
Purpose:
To specify a temperature of the fusing unit for optimum printing of each paper type. To lower the
temperature, specify a negative value. To increase, specify a positive value.
The default settings may not yield the best output on all paper types. When the printed paper has
curled, try lowering the temperature. When the toner does not fuse on the paper properly, try
increasing the temperature.
Note:
The print quality depends on the values you select for this menu item.
Values:
Plain
0
*
-3 - 3
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad 298