EasyManuals Logo

ETC Element 2 Operating Manual

ETC Element 2
649 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
32 Eos Family Operations Manual
Gio Encoders
Encoders are provided above the control keypad. The four encoders are pageable controls, which are
populated with the parameters used in your show. Current encoder mapping is indicated at all times,
and the [Encoder Control] button opens full control on LCD touchscreen B.
Directly under the middle two encoders are six hardkeys for encoder control. From left to right,
these encoder paging keys control intensity, focus, color, shutter, image, and form. Pressing any of
these will change the parameters controlled by the encoders. To view other available encoder pages,
simply press the encoder paging keys to advance the pages.
[Encoder Paging Keys]+ [#] will take you directly to a page. [Flexi] +[Encoder Paging Keys] will toggle
the flexi encoder states. See Flexi Encoders (on page86)for more information. To post a parameter
category to the command line, use the parameter category buttons located in the CIA above the
Mini Encoder display. To post beam to the command line, double press the shutter, image, or form
parameter category buttons.
Gio @ 5 and Ion Xe Encoders
Encoders are provided above the control keypad, below the touchscreen. The four encoders are
pageable controls, which are populated with the parameters used in your show. Current encoder
mapping is indicated at all times, and the [Encoder Control] button opens full control on the screen.
Customizable Hardkeys
Eos Ti Customizable Hardkeys
Eos Ti has twenty customizable hardkeys. They are located between the two main touchscreens.
They will default to being macros 801-820.
Functionality for the hardkeys can be defined in ECU> Buttons> Ti FacePanel Buttons. See for con-
figuration instructions.
Gio Customizable Hardkeys
Gio has nine customizable hardkeys. Eight are located between the two touchscreens and one is
between [Label/Note] and [About] on the facepanel. The eight between the touchscreens will default
to being macros 801-808. The ninth key defaults to macro 821.
Functionality for the hardkeys can be defined in ECU> Buttons> Gio Face Panel Buttons. See for con-
figuration instructions.
Gio @ 5 Customizable Hardkeys
Gio @ 5 has twenty customizable hardkeys. They are located beside the main touchscreen. They will
default to being macros 801-820.
Functionality for the hardkeys can be defined in ECU> Buttons> Gio @ 5 Face Panel Buttons. See for
configuration instructions.
Parameter and Category Buttons
Parameter buttons are posted in the Central Information Area (CIA). When certain functions need to
be accessed, a group of related parameters will populate in the parameter category display.

Table of Contents

Other manuals for ETC Element 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ETC Element 2 and is the answer not in the manual?

ETC Element 2 Specifications

General IconGeneral
DMX Outputs2
TouchscreenYes
NetworkingEthernet
TypeLighting Control Console
Master Faders2
Encoders4
Ethernet Ports2
USB Ports4
Video OutputDisplayPort
Power Input100-240VAC, 50/60Hz
Power SupplyInternal
Control Channels6144
OutputArt-Net
DisplayMulti-Touch LCD
StorageSolid State Drive (SSD)

Related product manuals