Using Magic Sheets 417
The main area of the magic sheet will display a grid to aid with layout. The editing tools will be dis-
played on the right side of the magic sheet. The editing tool window is divided up into three areas: lay-
out tools, the MS Object Library, which is made up of four tabs that contain the MS Objects, and the
MS Object Properties.
Note: To see a description of a tool or object, hover your cursor over it. Its title will display
after a second or two.
You can drag and drop objects onto the magic sheet, or you can use the layout tools to create arrays
of objects.
Note: Holding down [Shift] while placing an object will bypass the snap to grid behavior.
Quick Save
Clicking on the {Quick Save} button allows you to save an undo restore point for the
magic sheet you are working on. Once saved, a green check mark will temporarily
appear next to the {Quick Save} button.
It is recommended that you click {Quick Save} before making any major changes to the magic sheet
that you think you might want to undo. [Undo] [Enter] will take the magic sheet back to the last undo
restore point. An undo restore point is also set whenever you exit the editor.
Quick saving a magic sheet will also send any changes made to the magic sheet to all the devices in a
multi-console system.
Layout Tools
The layout tools are divided into four areas:
To Next Page
Loading...
Need help?
General
