System Basics 43
From this menu you can select one of the available clear options by clicking on the desired button in
the CIA. Eos will ask you for a confirmation before performing the selected clear. For {Clear Targets},
Eos will allow you to choose which record targets you want to clear.
CAUTION: Clear functions cannot be undone by using the Undo option.
From the {Clear Targets} screen you can select which record targets you wish to clear. The buttons at
the center of the CIA represent all of the record targets that you can choose to clear. By default all
components are selected (gray) and will be cleared. To withhold any targets from being cleared,
simply deselect them in the CIA by clicking the respective button. To deselect all of the targets, click
the {Deselect All} button.
To reselect all targets, click the {Select All} button and all buttons will return to gray (selected). To
stop the process, click the {Cancel} button.
When you have selected or deselected all of the record targets you require, click {OK}.
After clearing, the CIA will return to the browser. If you want to perform additional clear functions,
you must select {Clear} from the browser again.
To exit the clear functions screen without clearing, press the [Displays] key at any time or select a
clear button and then select {Cancel} from the confirmation screen.
Reset System vs Clear Show
Using {Reset System} will open a new show file and reset the Setup options to their defaults. Using
{Clear Show} will only open a new show file.
Patch 1 to 1 vs Clear Patch
Using {Patch 1 to 1} will clear your patch and set it to a 1-to-1 patch. Using {Clear Patch} will only
clear out the patch.
To Next Page
Loading...
Need help?
General
