EasyManuals Logo

ETC Element 2 Operating Manual

ETC Element 2
649 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #489 background imageLoading...
Page #489 background image
Eos Configuration Utility 487
Note: This option is for use with older I/O cards.
{UpgradeI/O Firmware} is used to upgrade the firmware in the desk’s I/O card.
When you first open the I/O Downloader, it will look for the connected console. This may take a
second or two.
Once the console is found, the downloader will search for the needed files. If it finds the file, it will list
it and you can click {Download}. If it doesn't find the file, you can use {Browse} to look for the
needed file and selected it. Once finished, click {Exit}.
Network Drives
{Network Drives...} allows you to select an alternative show file storage location on another desk or
computer. After setting this location, it will appear as an option within the save and open dialogs in
Eos.
In the {Network Drives...} dialog box, there is a {Add} button for mapping a network drive. In the In
the Add Network Drive dialog box, select the drive letter that is appropriate, the network path, and
the path type. The network path can use either the IP Address or the Device Name. (Example:
\\10.101.90.101\ShowArchive or \\YourDeviceName\ShowArchive) The network path type can be
Eos, Eos Ti, Gio, Gio @ 5, Ion, Ion Xe, Ion Xe 20, Ion Xe RPU, Element, Element 2, or ETCnomad Puck.
If Other is selected, you will have additional fields to fill out for Username and Password.
Shared Folders
{Shared Folders...} allows you to see if any folders are currently being shared by the desk. You can
select the folder and click {Don’t Share} if you no longer want to share the folder. By selecting {Don’t
Share} here, you will also uncheck the box for ShareShow Archive(on page472) in the General tab.
Log Off
This will log off the current user. This should only be done under the direction of ETC Technical Ser-
vices for administrative purposes.
Firmware Update
The firmware update window will display any detected devices that use firmware and may require an
update. With the device selected, if an update is available, the {Update} button will be highlighted in

Table of Contents

Other manuals for ETC Element 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ETC Element 2 and is the answer not in the manual?

ETC Element 2 Specifications

General IconGeneral
DMX Outputs2
TouchscreenYes
NetworkingEthernet
TypeLighting Control Console
Master Faders2
Encoders4
Ethernet Ports2
USB Ports4
Video OutputDisplayPort
Power Input100-240VAC, 50/60Hz
Power SupplyInternal
Control Channels6144
OutputArt-Net
DisplayMulti-Touch LCD
StorageSolid State Drive (SSD)

Related product manuals