ETC Element 2 Operating Manual

500 Eos Family Operations Manual
Relay Out (remote trigger connector)
Allows you to set the Group and Address In values for the remote trigger port on the back of your
console.
Interface Protocols
Additional settings are found in the ECU>Settings>Network.
See Open Sound Control (OSC) (on page539) for more information.

ETC Element 2 Specifications

General

DMX Outputs	2
Touchscreen	Yes
Networking	Ethernet
Type	Lighting Control Console
Master Faders	2
Encoders	4
Ethernet Ports	2
USB Ports	4
Video Output	DisplayPort
Power Input	100-240VAC, 50/60Hz
Power Supply	Internal
Control Channels	6144
Output	Art-Net
Display	Multi-Touch LCD
Storage	Solid State Drive (SSD)