To Next Page

To Previous Page

514 Eos Family Operations Manual

submaster On. If the submaster is set to a dwell time of Hold, the second trigger will turn the sub-

master Off.

Create an analog input event where an input on address 6 will bump Sub 1.

<Event> [4] [/] [1] {Address} [6] [Sub] [2] {Bump} [Enter]

Fader

Acts as if the input is directly controlling the fader on the submaster. A contact closure will move the

fader from 0 to 100% instantly. A 0-10VDC input will fade the value proportionally, where 0VDC is

the fader at 0%, and 10VDC is the fader at 100%.

Create an analog input event where an input on address 7 will control the fader for Sub 3.

<Event> [4] [/] [1] {Address} [7] [Sub] [3] {Fader} [Enter]

Other manuals for ETC Element 2

Questions and Answers:

Need help?

Do you have a question about the ETC Element 2 and is the answer not in the manual?

General