552 Eos Family Operations Manual
OSC Method Arguments Examples/Comments
(optional)
/eos/group/<number>/param/
<parameter>
number for parameter level /eos/group/1/param/pan=90
/eos/group/<number>/param/
<
p
arame
t
e
r
1>
/<pa
r
ameter
2>/...
number(s) for parameter levels /eos/group/1/param/pan/tilt=90,75
/eos/group/<number>/param/
<parameter>/dmx
number for parameter dmx level /eos/group/1/param/pan=255
/eos/group/<number>/param/
<
p
arame
t
e
r
1>
/<pa
r
ameter
2>/.../
d
mx
number(s) for dmx parameter levels /eos/group/1/param/pan/tilt/dmx=255
Macro
Selects and fires (executes) macros
OSC Method Arguments Examples/Comments
/eos/macro number for macro to select /eos/macro=1
/eos/macro/fire number for macro to run /eos/macro/fire=1
/eos/macro/<number>/fire number for button edge: 1.0=down, 0.0=up (optional) /eos/macro/1/fire=1.0
Submaster
OSC Method Arguments Examples/Comments
Select Submaster
/eos/sub number for sub to select /eos/sub=1
Control Submaster
/eos/sub/<number> floating point number to set sub percent to
/eos/sub/1=0.75 (useful for mapping to an
OSC slider)
/eos/sub/<number>/out number for button edge: 1.0=down, 0.0=up (optional) /eos/sub/1/out
/eos/sub/<number>/home number for button edge: 1.0=down, 0.0=up (optional) /eos/sub/home
/eos/sub/<number>/level number for button edge: 1.0=down, 0.0=up (optional) /eos/sub/1/level
/eos/sub/<number>/full number for button edge: 1.0=down, 0.0=up (optional) /eos/sub/1/full
/eos/sub/<number>/min number for button edge: 1.0=down, 0.0=up (optional) /eos/sub/1/min
/eos/sub/<number>/max number for button edge: 1.0=down, 0.0=up (optional) /eos/sub/max
/eos/sub/fire number for sub to bump /eos/sub/fire=1
/eos/sub/<number>/fire number for button edge: 1.0=down, 0.0=up (optional)
/eos/sub/1/fire=1.0 (bump sub 1 on)
/eos/sub/1/fire=0.0 (bump sub 1 off)
Preset
OSC Method Arguments Examples/Comments
Select Preset
To Next Page
Loading...
Need help?
General
