Show Control 559
OSC Fader Banks
“/eos/out/fader/<index>”, <string argument with descriptive text for the OSC fader bank at
<index>>
“/eos/out/fader/<index>/<fader index>/name”, <string argument with fader label for OSC
fader bank at <index> for fader <fader index>>
“/eos/fader/<index>/<fader index>”, <floating point number for fader percent: 0.0-1.0>
Note: Eos will delay sending fader levels for faders that have been moved via OSC com-
mands for 3 seconds. If you move a fader on an OSC remote control, Eos will send the
actual fader level 3 seconds later.
OSC Show Control Events
Show control events are fired as the console executes the corresponding action, much like MIDI
Show Control output events.
“/eos/out/event/cue/<cue list number>/<cue number>/fire”
“/eos/out/event/cue/<cue list number>/<cue number>/stop”
“/eos/out/event/sub/<sub number>”, <integer argument, 0=Bump Off, 1=Bump On>
“/eos/out/event/macro/<macro number>”
“/eos/out/event/relay/<relay number>/<group number>”, <integer argument, 0=On, 1=Off>
“/eos/out/event” (used for time code learn)
Show File Information
“/eos/out/show/name”, <string argument with show title>
“/eos/out/event/show/saved”, <string argument with file path>
“/eos/out/event/show/loaded”, <string argument with file path>
“/eos/out/event/show/cleared”
Miscellaneous Console Events
“/eos/out/event/state”, <integer argument, 0=Blind, 1=Live>
Note: When Eos receives the command “/eos/ping” it will reply with “/eos/out/ping”. You
may optionally add any number of arguments and Eos will reply with the same arguments.
This may be useful for testing latency.
To Next Page
Loading...
Need help?
General
