System Basics 75
The following options are available in the PSD Configuration Menu:
Target Grid - this option is only available when the PSDis split, and is used along with the Lock
Status option. Target Grid allows you to select either the top or bottom display. Press [Format]
to split the PSD.
Lock Status - allows you to lock the PSD to a certain cue list. When the PSD is split, you will use
Target Grid to first select top or bottom of the display, and then you can use Lock Status to
select the cue list.
Note: Phantom cue lists will display but cannot be locked to. See Cue List Properties
(on page281) to learn more about phantom cue lists.
Display Cue Parts - displays the individual parts of a part cue. When not enabled, the number
of parts for that cue will display as a superscript number beside the cue's number.
Display Cue Links - displays the Link/Loop (on page261)information.
Display Scenes - displays cue sceneinformation.
Display PSD TimeCountdown - displays the cue category times countdown in the PSD as a
cue is fading.
Display Master Playback Status - displays the current cue's status information.
Display Fader Ribbon - displays the fader ribbon, which shows the current fader page under
the Master Playback Status. Not available on Element 2.
Display Notes - displays the Cue Notes (on page263) in a horizontal bar at the bottom of the
PSD.
Display Command Line - displays an optional command line on the PSD. Not available on Ele-
ment 2.
Break Link to Live/Blind - When selecting the Live/Blind display, the PSD will also come into
view if it is currently hidden. This option allows you to break the link between the PSD and the
Live/Blind displays so that the PSD will no longer come into view when selecting Live/Blind.
To Next Page
Loading...
Need help?
General
