To Next Page

To Previous Page

System Basics 95

Fader list (Tab 35)

In Live using the {Properties} softkey

Tap or click on {Chan Filter} to assign channels or groups. Tap or click on {Param Filter} to open a list

of available parameters that you can filter.

Note: Filters will travel with their assigned cue lists and submasters wherever they are

mapped.

When a filter has been applied, an indicator will display in the fader ribbon. C will display for channel

filter, and F is for parameter filter.

Clearing Channel and Parameter Filters

Press the red [X] to clear the channel or parameter filters listed.

Virtual Fader Module

A virtual fader module can be opened from the home screen by selecting the Faders button or by

pressing [Tab] [2][8].

The virtual fader module has a configuration menu, which is accessed by first selecting the module

tab and then double clicking on the tab to open the menu. With the virtual fader module selected,

you can also select the gear icon, which is located by the tabs, to open the configuration menu.

Other manuals for ETC Element 2

Questions and Answers:

Need help?

Do you have a question about the ETC Element 2 and is the answer not in the manual?

General