Fagor 8070 BL - Page 253

Programming manual.
CNC 8070
TOOL COMPENSATION
13.
Tool radius compensation
·253·
(REF: 1709)
ARC-TO-STRAIGHT PATH
When the angle between the tangent of the arc and the straight line is smaller than or equal
to 180º, the transition between the paths is independent from the selected G136/G137
function.
When the angle between the tangent of the arc and the straight line is greater than 180º,
the way the compensated paths are joined depends on the type of transition selected
(G136/G137).
0º <  < 90º  = 90º
90º <
 < 180º  = 180º
G136 G137
180º <
 < 270º 180º <  < 270º
 = 270º  = 270º
270º <
 < 360º 270º <  < 360º