177
DE
7.5 First inspection
After 4 months or after the first 200 kilometers
ridden (whichever comes first), have a FLYER
specialist dealer check the following points
and readjust components if necessary:
• The tight fit of all bolts, nuts and quick
releases.
• The perfect condition and running of the
wheel set.
If necessary, have the wheel set
properly centered by a FLYER specialist
dealer.
• The perfect condition of the tires.
• The tightening torques of all parts.
Torque: See the model-specific
information in the applicable Tech-
nical Data document.
• The adjustment of the headset.
• The brake lines and shift cables.
• The proper condition and operation of the
gear shift.
If necessary, have your FLYER special-
ist dealer adjust the gear shift correctly.
• The proper condition and operation of the
brakes.
If necessary, have the brakes properly
adjusted by your FLYER specialist dealer.
• The perfect condition and proper func-
tioning of the suspensions.
If necessary, have your FLYER spe-
cialist dealer adjust the suspension com-
ponents correctly.
Important: On the occasion of this
initial inspection, have your FLYER
specialist dealer introduce you to
the correct cleaning and oiling of the
chain, as well as the correct check-
ing of the components for proper
functioning and damage.
7.6 Regular inspection
Have your e-bike regularly inspected by
a FLYER specialist dealer once a year or
after 1,000 kilometers of cycling (whichever
comes first) and have components adjusted
or replaced if necessary.
The regular inspection should include the
following points in particular:
• All moving parts for which lubrication
is provided are greased with a suitable
lubricant.
• The frame and components of the e-bike
are checked for cracks and damage.
• Paint damage is repaired.
• Components or parts with rust spots are
replaced.
• All bare metal parts (except brake sur-
faces) are treated against corrosion (rust).
• Defective or damaged parts are replaced.
• The wheel set is checked and centered if
necessary.
• The tension of the spokes is checked.
• Chain and gear rims are cleaned and
checked for wear.
• The chain is oiled with suitable lubricant.
• The rims are checked for wear.
• The brake pads are checked for wear.
• Have the oil changed.
• All bolts, nuts, quick-release axles and
quick releases are checked for tightness.
• The brakes and quick-release axles are
checked and adjusted correctly if neces-
sary.
Damaged or worn parts will be
replaced.
• The gear shift is checked and adjusted if
necessary.
Damaged or worn parts will be
replaced.
• The hubs are checked.
• The headset is checked.
• The pedals are checked.
To Next Page
Loading...
