EasyManua.ls Logo

Flyer Goroc2 Series - Bell;Horn; Kickstand

Flyer Goroc2 Series
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
200
Daytime running light
The daytime running light serves exclusively
as a signal to other road users and switches
on and off automatically using a sensor.
24 Kickstand
The kickstand is used to park your e-bike. It
is located on the left in the direction of travel.
The kickstand is a model-dependent com-
ponent. If your e-bike is not equipped with
a kickstand at delivery, you can retrofit it if
necessary.
27
In this case, contact a FLYER specialist
dealer for advice on a suitable kickstand
for your e-bike.
Keep in mind that the kickstand may
limit you in certain cycling maneuvers for
which your e-bike is designed.
25 Bell/horn
The bell or horn is used to give acoustic sig-
nals to other road users.
i
Important: To participate in road
traffic, pedelecs must be equipped
with a functioning bell and
S-pedelecs with a functioning horn,
which must comply with coun-
try-specific requirements.
All FLYER pedelecs are equipped with a bell
upon delivery and all FLYER S pedelecs are
equipped with a horn.
Contact your FLYER specialist dealer if
your bell or horn is not working properly
or if you are having problems operating it.
27 Not all e-bikes can be retrofitted with a kickstand.
If in doubt, ask your FLYER specialist dealer for more
information.

Table of Contents

Other manuals for Flyer Goroc2 Series

Related product manuals