92
18-6-3. AUX Output
Open the [SETUP – OUTPUT－AUX XPT] menu. Choose an AUX output at SELECT. Then
select ON (pass) or OFF (blank).
OUTPUT :SELECT : XPT : CTRL : ANCI : 1/2
AUX XPT : =AUX1 : =BLACK: =ON : =OFF :
18-7. Setting Date and Time
(1) Press the MENU button, then press the 7/SETUP button to display the SETUP top menu.
Turn F1 to select SYSTEM, then press F1 or the PAGE DOWN button to open the [SETUP-
SYSTEM] menu.
(2) Turn F1 to select TIME, then press F1 or the PAGE DOWN button to open the [SETUP -
SYSTEM - TIME] menu.
SETUP :>FORMAT >REF I/O >ARCNET >ETHERNET
SYSTEM :>TIME >INIT >REBOOT
(3) If you need to change the date, turn F1 to select Month, Day or Year, then turn F1 to change
the setting.
(4) If you need to change the time, turn F3 to select Hour, Minute or Second, then turn F3 to
change the setting.
SYSTEM : DATE(mm/dd/yy):TIME[10:20:10] : 1/1
TIME : =Feb/27/10 : =10:20:20 :
18-8. Buzzer, Brightness and Screen Saver
The brightness of the display and buttons on the control panel and the volume of the buzzer can
be adjusted in the menu. You can also set the start time of the screen saver shown on the menu
display.
(1) Press the MENU button, then press the 7/SETUP button to display the SETUP top menu.
Turn F1 to select PANEL, then press F1 or the PAGE DOWN button to open the [SETUP-
PANEL] menu.
SETUP :>UTILITY >TRS CTRL>KEY CTRL>USER BTN
PANEL :
(2) Turn F1 to select UTILITY, then press F1 or the PAGE DOWN button to open the [SETUP-
PANEL-UTILITY] menu.
PANEL :BUZZER :BRIGHT :S-SAVER:LOGO : 1/1
UTILITY : =OFF : =8 : =1 : =OFF :
Buzzer: The BUZZER item sets the volume of the buzzer.
Brightness:
The BRIGHT item sets the brightness of the display and buttons on the
control panel.
Setting range: 7-8 (when OU version is 01-00)
Setting range: 1-8 (when OU version is 01-01 and higher)
Screen saver:
The S-SAVER item sets the start time of the screen saver in minutes. Set
to OFF if you do not want to use the screen saver.
Logo The LOGO item sets the Hanabi logo mark to turn on of off.
To Next Page
