FOR-A HVS-300HS - Borders

70
12-7. BORDERS
Borders can be added to DSK images. Inside border and outside borders can be adjusted
independently.
(1) Go to the [DSK - BORDER] menu.
(2) To use the inside border, set the width at the INSIDE X and Y. To use the outside border, set
the width at the OUTSIDE X and Y.
DSK : INSIDE : OUTSIDE : 1/3
BORDER :X=0 Y=0 :X=0 Y=0 :
(3) Press the PAGE DOWN button to go to PAGE2. In this menu, border softness can be
adjusted. INSIDE X and Y allow users to set the softness for the inner half of the set border.
The softness of the outer half of the border is set at OUTSIDE X and Y.
WIPE : INSIDE :OUTSIDE: : 2/3
BDR SOFT:X=0 Y=0 : =0 : :
(4) Press the PAGE DOWN button to go to PAGE3. Turn F4 to select a color for the border from
eight standard colors. If you wish to use a color other than those eight, adjust the color using
F1, F2 and/or F3. You can also use the joy stick to set the color.
DSK : BORDER COLOR :RECALL : 3/3
BDR COL :S=66.3 L=5.4 H=3.5 : >BLUE :
 Inside Border
 Outside Border
W/ border
Inner half
softness
SOFT-Y
SOFT-X
DSK image
W/ border
Outer half
softness
EDGE SOFT
DSK image
W/o border
DSK image
W/ border
Y X
DSK image
W/o border
DSK image DSK image
W/ border
Inner half
softness
SOFT-Y
SOFT-X
DSK image
W/ border
Y X
DSK image
W/ border
Outer half
softness
EDGE SOFT