62
Adjusting Chromakey Colors
Use to fine-tune specific chromakey colors, press the PAGE DOWN button to go to PAGE3 of
the KEYER menu. Turn F3 to make HUE adjustments.
KEYER : GAIN : CLIP : HUE :COL CAN: 3/5
CK ADJT : =1.0 : =0.0 : =0.0 : =ON :
Chroma Angle
The ANGLE parameter determines the width of the color hue. Press the PAGE DOWN button
to go to PAGE5 of the KEYER menu. If the reference color (blue back panel or other
background) is not uniform and has some variation, widen the ANGLE to make the HUE
range wider. You can finely adjust the range by using Y, C and K parameters of ANGLE
OFFSET.
KEYER : ANGLE : ANGLE OFFSET : 5/5
ANGLE : =45.00:Y=0.00 C=0.00 K=0.00 :
Color Cancellation and Suppression
Turning on Color Cancel (default) reduces the reflection in the foreground and background
images. If you still notice some tint or spill of color (blue) on the foreground subject, use Y, C1,
and C2 parameters in SUPPRESSION respectively to eliminate or reduce the color noises.
KEYER : SUPPRESSION : : 4/5
SUPPRES :Y=1.00 C1=0.60 C2=0.0 : :
To Next Page
Loading...
