System Wireless The FortiWiFi wireless LAN interface
FortiGate Version 3.0 MR4 Administration Guide
01-30004-0203-20070102 105
System Wireless
This section describes how to configure the Wireless LAN interfaces on FortiWiFi
units.
The following topics are included in this section:
• The FortiWiFi wireless LAN interface
• Channel assignments
• System wireless settings (FortiWiFi-60)
• System wireless settings (FortiWiFi-60A and 60AM)
• Wireless MAC Filter
• Wireless Monitor
The FortiWiFi wireless LAN interface
You can configure the FortiWiFi Wireless interface to:
• provide an access point to which users with wireless network cards can
connect (Access Point mode).
or
• connect the FortiWiFi unit to another wireless network (Client mode)
Access Point mode is the default mode. FortiWiFi-60A and FortiWiFi-60AM units
can provide multiple WLANs.
FortiWiFi units support the following wireless network standards:
• IEEE 802.11a (5-GHz Band)
• IEEE 802.11b (2.4-GHz Band)
• IEEE 802.11g (2.4-GHz Band)
• Wired Equivalent Privacy (WEP)
• Wi-Fi Protected Access (WPA) using pre-shared key or Radius server (Access
Point mode only)