Fortinet Fortigate-5000 series - Viewing Fortianalyzer Reports from a Fortigate Unit; Viewing Parts of a Fortianalyzer Report

FortiGate Version 3.0 MR4 Administration Guide
438 01-30004-0203-20070102
Viewing FortiAnalyzer reports from a FortiGate unit Log&Report
Viewing FortiAnalyzer reports from a FortiGate unit
The FortiAnalyzer unit can generate a number of specific reports for a FortiGate
unit, and run these reports at scheduled times, or on demand. If you are using a
FortiGate unit with FortiOS 3.0MR2 or higher, you can view any report generated
from the FortiAnalyzer unit for that FortiGate unit on the Report Access page.
To view FortiAnalyzer reports
1 Go to Log&Report > Report Access > FortiAnalyzer.
2 Select Historical Reports.
3 Select the report name to view the report.
Viewing parts of a FortiAnalyzer report
You can view different parts of a FortiAnalyzer report in the web-based manager.
The following procedure enables you to view the Mail Activity section of a report.
To view Mail Filter Activity in a report
1 Go to Log&Report > Report Access > FortiAnalyzer.
2 Select Historical Reports.
3 Select the blue arrow to expand the report.
4 Select MailFilter Activity.html.
Use the above procedure for viewing other sections of a report. For example,
select Content Activity.html, instead of selecting MailFilter Activity.html.
Note: The FortiAnalyzer report that appears on the FortiAnalyzer page may not be the
report you want to view. Always select Historical Reports to find the report you want to view.