FortiGate Version 3.0 MR4 Administration Guide
154 01-30004-0203-20070102
Monitoring administrators System Admin
Monitoring administrators
To see the number of logged-in administrators, go to System > Status. Under
System Information, you will see Current Administrators. Click on Details to view
information about the administrators currently logged in to the FortiGate unit.
Figure 82: System Information > Current Administrators
Web Administration Ports
HTTP Enter the TCP port to be used for administrative HTTP
access. The default is 80.
HTTPS Enter the TCP port to be used for administrative HTTPS
access. The default is 443.
Telnet Port Enter the telnet port to be used for administrative access.
The default is 23.
SSH Port Enter the SSH port to be used for administrative access.
The default is 22.
Enable v1
compatibility
Select to enable compatibility with SSH v1 in addition to
v2. (Optional)
Timeout Settings
Idle Timeout Enter the number of minutes that an administrative
connection can be idle before the administrator must log
in again. The maximum is 480 minutes (8 hours). To
improve security, keep the idle timeout at the default
value of 5 minutes.
Language
Web Administration Select a language for the web-based manager to use.
Choose from English, Simplified Chinese, Traditional
Chinese, Japanese, Korean, or French.
Note: You should select the language that the
management computer operating system uses.
LCD Panel (LCD-equipped models only)
PIN Protection Select the PIN Protection check box and type a 6-digit
PIN.
Administrators must enter the PIN to use the control
buttons and LCD.
Enable SCP Enable if you want users logged in through the SSH to be
able to use the SCP to copy the configuration file.
To Next Page
Loading...
Need help?
General