Fortinet Fortigate-5000 series - Fortianalyzer Reports

Log&Report Reports
FortiGate Version 3.0 MR4 Administration Guide
01-30004-0203-20070102 429
The report is not updated in real-time. You can refresh the report by selecting the
Memory tab.
Configuring the graphical view
The FortiGate basic traffic report includes a wide range of services you can
monitor. For example, you can view only email services for the last three days.
To change the graphical information
1 Go to Log&Report > Report Access > Memory.
2 Select the time period to include in the graph from the Time Period list.
3 Deselect the services to not include in the graph. All services are selected by
default.
4 Select Apply.
The graph refreshes and displays with the content you specified in the above
procedure. The Top Protocols Ordered by Total Volume graph does not change.
FortiAnalyzer reports
You can configure a simple FortiAnalyzer report from FortiGate logs in the
web-based manager or CLI. If you want to configure a report using the CLI
interface, see the FortiGate CLI Reference for more information.
See the FortiAnalyzer Administration Guide for details on how to add and
configure additional report profiles.
Services By default all services are selected. When you refresh your browser or
go to a different menu, all services revert to default settings. Deselect
the services you do not want to include in the graphical analysis.
• Browsing
• DNS
• Email
• FTP
• Gaming
• Instant Messaging
• Newsgroups
• P2P
• Streaming
• TFTP
• VoIP
• Generic TCP
• Generic UDP
• Generic ICMP
• Generic IP
Note: If you require a more specific and detailed report, configure a report from the
FortiAnalyzer web-based manager or CLI. See “Configuring a FortiAnalyzer report” on
page 430 if you require a simple FortiAnalyzer report. The FortiAnalyzer unit can generate
over 140 different reports providing you with more options than the FortiGate unit provides.
Note: FortiAnalyzer reports do not appear if the FortiGate unit is not connected to a
FortiAnalyzer unit, or if the FortiAnalyzer unit is not running firmware 3.0 or higher.