Fortinet Fortigate-5000 series - Protection Profile CLI Configuration

Firewall Protection Profile Protection profile CLI configuration
FortiGate Version 3.0 MR4 Administration Guide
01-30004-0203-20070102 283
4 Select protection profile.
5 Select a protection profile from the list.
6 Configure the remaining policy settings, if required.
7 Select OK.
8 Repeat this procedure for any policies for which to enable network protection.
Protection profile CLI configuration
Use the config firewall profile CLI command to add, edit or delete
protection profiles. Use protection profiles to apply different protection settings for
traffic controlled by firewall policies.
Note: For complete descriptions and examples of how to use CLI commands, see the
FortiGate CLI Reference.