Fortinet Fortigate-5000 series - System Chassis (Fortigate-5000 Series); SMC (Shelf Manager Card)

System Chassis (FortiGate-5000 series) SMC (shelf manager card)
FortiGate Version 3.0 MR4 Administration Guide
01-30004-0203-20070102 173
System Chassis (FortiGate-5000
series)
For FortiGate-5000 series modules installed in a FortiGate-5050 or
FortiGate-5140 chassis, you can go to System > Chassis to view real-time
operating status information about the hardware components installed in the
chassis.
From the system chassis pages you can view information about all of the
hardware components in the chassis. You can use the get chassis status
command to display similar chassis information from the FortiGate CLI.
Information displayed by the system chassis pages and by the get chassis
status command depends on the FortiGate-5000 series chassis and the
FortiGate-5000 series modules installed in the chassis and not on the
FortiGate-5000 module that you are connecting to.
The system chassis pages display information received from the chassis shelf
manager. The system chassis pages only display information if at least one shelf
manager is functioning in the chassis and only if the FortiGate-5000 module that
you have connected to can communicate with a shelf manager.
This section describes:
• SMC (shelf manager card)
• Blades (FortiGate-5000 chassis slots)
• Chassis monitoring event log messages
SMC (shelf manager card)
Go to System > Chassis > SMC to view the status of the shelf manager cards
(SMCs) installed in the FortiGate-5000 series chassis. The SMC list is the same
for the FortiGate-5140 chassis and the FortiGate-5050 chassis. The SMC list
shows basic status information about the shelf manager cards in the chassis.
Figure 95: Shelf manager card (SMC) list
Refresh interval Set how often the web-based manager refreshes the information displayed
on the SMC list.
Refresh Manually refresh the information displayed on the SMC list.
SMC # Shelf manager card slot number: SMC 1 or SCM 2.
Status Current status of the shelf manager card in each chassis slot. The status
can be Present if a shelf manager card is installed in the slot and Empty if a
shelf manager card is not installed.
Active/Standby The mode of the shelf manager card in each chassis slot. Shelf managers
can operate in active or standby mode. In active mode the shelf manager is
operating the chassis. In standby mode the shelf manager is waiting to
switch to active mode if it detects that the active shelf manager is not
operating. If status is empty, active/standby is blank.