FortiGate Version 3.0 MR4 Administration Guide
128 01-30004-0203-20070102
SNMP System Config
Configuring an SNMP community
An SNMP community is a grouping of equipment for network administration
purposes. Add SNMP communities so that SNMP managers can connect to the
FortiGate unit to view system information and receive SNMP traps. You can add
up to three SNMP communities. Each community can have a different
configuration for SNMP queries and traps. Each community can be configured to
monitor the FortiGate unit for a different set of events. You can also add the IP
addresses of up to 8 SNMP managers to each community.
Figure 70: SNMP community options (part 1)
Queries The status of SNMP queries for each SNMP community. The query
status can be enabled or disabled.
Traps The status of SNMP traps for each SNMP community. The trap
status can be enabled or disabled.
Enable Select Enable to activate an SNMP community.
Delete icon Select Delete to remove an SNMP community.
Edit/View icon Select to view or modify an SNMP community.
To Next Page
Loading...
