EasyManuals Logo

Fortinet Fortigate-5000 series User Manual

Fortinet Fortigate-5000 series
458 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #174 background imageLoading...
Page #174 background image
FortiGate Version 3.0 MR4 Administration Guide
174 01-30004-0203-20070102
Blades (FortiGate-5000 chassis slots) System Chassis (FortiGate-5000 series)
Blades (FortiGate-5000 chassis slots)
Go to System > Chassis > Blades to display a list of the slots in the
FortiGate-5000 chassis that the FortiGate-5000 series module is installed in. The
list of slots shows whether the slot is empty or contains a FortiGate-5000 module.
If a slot contains a module, the display shows the type of module in the slot. Slots
can contain node cards such as the FortiGate-5001SX module and switch cards
such as the FortiSwitch-5003 module. The slot containing the FortiGate-5000
module that you are connecting to is highlighted in yellow.
If the FortiGate-5000 series module that you are connecting to is installed in a
FortiGate-5050 chassis, the blades list contains 5 rows. For a FortiGate-5140
chassis the blades list contains 14 rows.
For each slot that contains a module, the blades list indicates if the monitored
temperatures and voltages for the module in that slot are within acceptable
ranges. If temperature and voltage show good, the module is operating with
acceptable ranges. If temperature or voltage show alarm, the shelf manager has
registered an alarm because a temperature or voltage is outside of the acceptable
range.
If you have SNMP enabled and have selected the Temperature too high and
Voltage out of range SNMP events, when the shelf manager registers a
temperature or voltage alarm, the FortiGate-5000 module SNMP agent sends an
SNMP trap.
Figure 96: Example FortiGate-5050 blades list
Refresh interval Set how often the web-based manager refreshes the information
displayed on the blades list.
Refresh Manually refresh the information displayed on the blades list.
Slot # The slot number in the chassis. Slots 1 to 5 are listed for the
FortiGate-5050 chassis and slots 1 to 14 are listed for the
FortiGate-5140 chassis.
Blade Type Indicates whether the slot contains a node card (for example, a
FortiGate-5001SX module) or a switch card (for example, a
FortiSwitch-5003 module).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fortinet Fortigate-5000 series and is the answer not in the manual?

Fortinet Fortigate-5000 series Specifications

General IconGeneral
BrandFortinet
ModelFortigate-5000 series
CategoryFirewall
LanguageEnglish

Related product manuals