Fortinet Fortigate-5000 series User Manual

System Status Status page
FortiGate Version 3.0 MR4 Administration Guide
01-30004-0203-20070102 43
System information
Figure 9: Example FortiGate-5001 System Information
Serial Number The serial number of the current FortiGate unit. The serial number is
specific to the FortiGate unit and does not change with firmware
upgrades.
Uptime The time in days, hours, and minutes since the FortiGate unit was last
started.
System Time The current date and time according to the FortiGate unit internal
clock.
Select Change to change the time or configure the FortiGate unit to
get the time from an NTP server. See “Configuring system time” on
page 49.
Host Name The host name of the current FortiGate unit.
If the FortiGate unit is in HA mode, this field is not displayed.
Select Change to change the host name.
See “Changing the FortiGate unit host name” on page 50.
Cluster Name The name of the HA cluster for this FortiGate unit. See “HA” on
page 119.
The FortiGate unit must be operating in HA mode to display this field.
Cluster Members The FortiGate units in the HA cluster. Information displayed about
each member includes hostname, serial number, and if the unit is a
primary (master) or subordinate (slave) unit in the cluster. See “HA”
on page 119.
The FortiGate unit must be operating in HA mode with virtual
domains not enabled to display this field.
Virtual Cluster 1
Virtual Cluster 2
The role of each FortiGate unit in virtual cluster 1 and virtual cluster 2.
See “HA” on page 119.
The FortiGate unit must be operating in HA mode with virtual
domains enabled to display these fields.
Firmware Version The version of the firmware installed on the current FortiGate unit.
Select Update to change the firmware.
See “Upgrading to a new firmware version” on page 51.
FortiClient Version The currently loaded version of FortiClient. Select Update to upload a
new FortiClient software image to this FortiGate unit from your
management computer.
This is available only on FortiGate models that provide a portal from
which hosts can download FortiClient software.
Operation Mode The operating mode of the current FortiGate unit. A FortiGate can
operated in NAT mode or Transparent mode. Select change to switch
between NAT and Transparent mode. See “Changing operation
mode” on page 141
If virtual domains are enabled, this field shows the operating mode of
the current virtual domain. A virtual domain can be operating in either
NAT mode or Transparent mode.

Fortinet Fortigate-5000 series Specifications

General

Brand	Fortinet
Model	Fortigate-5000 series
Category	Firewall
Language	English