Fortinet Fortigate-5000 series User Manual

FortiGate Version 3.0 MR4 Administration Guide
72 01-30004-0203-20070102
Interface System Network
Figure 25: Switch Mode Management
Interface settings
Go to System > Network > Interface. Select Create New to create a new
interface. To edit an existing interface, select the Edit icon for that interface.
You cannot create a virtual IPSec interface here, but you can specify its endpoint
addresses, enable administrative access and provide a description. For more
information, see “Configuring a virtual IPSec interface” on page 82.
Figure 26: Create New Interface settings
Figure 27: Edit Interface settings
Switch Mode Select Switch Mode. Only one internal interface is displayed. This
is the default mode.
Interface Mode Select Interface Mode. All internal interfaces on the switch are
displayed as individually configurable interfaces.
OK Select to save your changes and return to the Interface screen.
Cancel Select to discard your changes and return to the Interface screen.

Fortinet Fortigate-5000 series Specifications

General

Brand	Fortinet
Model	Fortigate-5000 series
Category	Firewall
Language	English