System Wireless System wireless settings (FortiWiFi-60)
FortiGate Version 3.0 MR4 Administration Guide
01-30004-0203-20070102 107
System wireless settings (FortiWiFi-60)
Go to System > Wireless > Settings to configure wireless LAN settings.
Figure 53: Configuring wireless parameters
Table 7: IEEE 802.11g (2.4-GHz Band) channel numbers
Channel
number
Frequency
(MHz)
Regulatory Areas
Americas EMEA Israel Japan
CCK ODFM CCK ODFM CCK ODFM CCK ODFM
1 2412 X X X X – – X X
2 2417 X X X X – – X X
3 2422 X X X X – – X X
4 2427 X X X X – – X X
5 2432 XXXXXXXX
6 2437 XXXXXXXX
7 2442 XXXXXXXX
8 2447 XXXXXXXX
9 2452 X X X X – – X X
10 2457 X X X X – – X X
11 2462 X X X X – – X X
12 2467 – – X X – – X X
13 2472 – – X X – – X X
14 2484 – – – – – – X –
MAC Address The MAC address of the Wireless interface.
Operation Mode The current operating mode. Select Change to change it.
Access Point mode makes the FortiWiFi-60 unit act as a wireless access
point to which multiple clients can connect.
Client mode configures the unit to connect to another wireless network
as a client.
To Next Page
Loading...
Need help?
General