FortiGate Version 3.0 MR4 Administration Guide
160 01-30004-0203-20070102
Backup and restore System Maintenance
Figure 88: Advanced
Antivirus Engine The current version of FortiGuard antivirus engine on this FortiGate
unit. For more details, see “Configuring the FortiGate unit for FDN
and FortiGuard services” on page 162.
Web Portal Port Select the port for the web portal where users will be redirected if
they are denied access due to FortiClient check options in the
firewall policy. Select Save after changing the port number to commit
your change.
The default port number is 8009. The port number should only be
changed if there is a conflict.
Advanced (USB Auto-Install) This section is available only if a USB disk is connected
to the FortiGate unit. Select the options as required and
restart the FortiGate unit.
If you select both configuration and firmware update,
both occur on the same reboot. The FortiGate unit will
not reload a firmware or configuration file that is already
loaded.
On system restart,
automatically update
FortiGate configuration
Automatically update the configuration on restart. Ensure
that the Default configuration file name matches the
configuration file name on the USB disk.
On system restart,
automatically update
FortiGate firmware
Automatically update the firmware on restart. Ensure that
the Default image name matches the firmware file name
on the USB disk.
Import Bulk CLI Commands Import URL filter and Spam filter definitions from a text
file on the management computer to the FortiGate unit.
Enter the file name and path or use the Browse button
and locate the file.
You can create the text file by excerpting the appropriate
section of a FortiGate configuration backup file or by
typing the appropriate CLI commands.
Download Debug Log Download an encrypted debug log to a file. You can send
this debug log to Fortinet Technical Support to help
diagnose problems with your FortiGate unit.
To Next Page
Loading...
