Fortinet Fortigate-5000 series User Manual

Log&Report Alert Email
FortiGate Version 3.0 MR4 Administration Guide
01-30004-0203-20070102 427
3 Select Test Connectivity to receive a test email message to the email account you
configured in the above step.
4 Select Send alert email for the following if you require sending an email based on
one or all of the following:
5 Select Send an alert based on severity if you require sending an alert email based
on log severity level.
This enables the FortiGate unit to send an alert email whenever a specific log
level appears in the log.
6 Select the minimum severity level in the Minimum severity level list.
7 Select Apply.
SMTP user Enter the user name for logging on to the SMTP server to send alert
email messages. You only need to do this if you have enabled the
SMTP authentication.
Password Enter the password for logging on to the SMTP server to send alert
email. You only need to do this if you selected SMTP authentication.
Interval Time Enter the number of minutes before an alert email is sent to the
recipient.
Intrusion detected Select if you require an alert email message based on intrusion
detection.
Virus detected Select if you require an alert email message based on virus
detection.
Web access blocked Select if you require an alert email message based on blocked
web sites that were accessed.
HA status changes Select if you require an alert email message based on HA status
changes.
Violation traffic
detected
Select if you require an alert email message based on violated
traffic the FortiGate unit detects.
Firewall
authentication device
Select if you require an alert email message based on firewall
authentication.
SSL VPN login failure Select if you require an alert email message based on any SSL
VPN logins that failed.
Administrator
login/logout
Select if you require an alert email message based on whether the
administrator(s) logs in and logs out.
IPSec tunnel errors Select if you require an alert email message based on whether
there is an error in the IPSec tunnel configuration.
L2TP/PPTP/PPPoE
errors
Select if you require an alert email message based on errors that
occurred in L2TP, PPTP, or PPPoE.
Configuration
changes
Select if you require an alert email message based on any
changes made to the FortiGate configuration.
FDS license expiry
time (in days)
Enter the number of days for notification of FDS license expiry
time.
Disk usage in
percent
Enter a number for the percentage of disk usage that an alert
email will be sent.
FortiGuard log disk
quota
Select if you require an alert email message based on the
FortiGuard Log & Analysis log disk quota.
Note: The default minimum log severity level is Alert. If the FortiGate unit collects more
than one log message before an interval is reached, the FortiGate unit combines the
messages and sends out one alert email.

Fortinet Fortigate-5000 series Specifications

General

Brand	Fortinet
Model	Fortigate-5000 series
Category	Firewall
Language	English