Fax
4
4 Fax
160
1
Select [Communication Mode] on the [Fax/
Internet Fax Options] screen.
2
Select [F4800], then [Save].
3
Enter the telephone company ID number,
"0011", country code, area code, and recipient fax number as shown below.
Important • In some areas, you may need to enter a pause after the telephone company ID number.
Priority Send / Delay Start (Specifying Send Priority/Send Time)
Priority Send allows you to give priority to a fax or polling job over other jobs.
Delay Start allows you to specify when to send your fax. This feature is useful for
sending fax when communication charges are low, such as during night time.
Note • This feature is unavailable for Internet Fax and Server Fax.
• [Priority Send] can be set in combination with [Delay Start]. If both features are set, Priority
Send is performed at the set time.
1
Select [Priority Send / Delay Start].
2
Select any item.
îš„Priority Send
z
Off
Priority Send is not applied.
z
On
Priority Send is applied.
Note • If the Priority Send feature is selected
during transmission, the fax will be sent after the current transmission ends.
• In redial mode, the fax will be resent preferentially after the set redial interval.
• The Priority Send feature cannot be set separately for each recipient of Broadcast and multi-
polling jobs.
You can give priority to a pending job. For more information, refer to "Job Status" (P.287).
îš„Delay Start
z
Off
Delay Start is not applied.
z
Specific Time
Delay Start is applied.
To Next Page
Loading...
Need help?
General
