Power On / Off
41
Product Overview
2
Power On / Off
To use the machine, turn its power on. The machine takes approximately 70 seconds
to warm up and to be ready to copy or print. This may take more time depending on
your machine configuration.
Switch the power off at the end of the day or when not using the machine for an
extended period of time.
Use also the Energy Saver feature to save power consumption while the machine is not
in use.
For information on the Energy Saver feature, refer to"Energy Saver Mode" (P.44).
Important • If the machine is powered off, all the features of the machine will stop. When using the
machine throughout the day for jobs such as receiving fax, do not power it off.
Powering On
Follow the step below to switch the power on.
1
Press the power switch to the [|] position to
turn the power on.
Note • The “Please wait...” message indicates
that the machine is warming up. The
machine is not available during warming
up. The machine will be ready for use in
70 seconds. The time may vary
depending on the machine configuration.
Note • If the machine does not power on, check
that the power cord is plugged in, and the
RESET button is in the reset position
(depressed).
To Next Page
Loading...
Need help?
General
