3 Copy
72
Copy
3
1
Select [Dual Color].
2
Select [Target Area Color] copy service
settings.
3
Select a color.
[Non-target Area Color] Screen
This screen allows you to select the color to be used in place of the colors other than
the selected source colors. You can select from seven preset and six custom options.
For information about how to set custom colors, refer to "5 Tools" > "Copy Service Settings" > "Custom
Colors" in the Administrator Guide.
1
Select [Dual Color].
2
Select [Non-target Area Color].
3
Select a color.
[Output Color - Color] Screen
This screen allows you to specify the color to be used for single-color copying.
Available options are six preset and six custom options.
For information about how to set custom colors, refer to "5 Tools" > "Copy Service Settings" > "Custom
Colors" in the Administrator Guide.
1
Select [Single Color].
2
Select [Color].
3
Select a color.
Original Type (Selecting the Document Type)
This feature is the same as [Original Type] of the [Image Quality] screen. Refer to "Original Type
(Selecting the Document Type)" (P.74).
To Next Page
Loading...
