Facsimile Information Services
189
Fax
4
Facsimile Information Services
For information on subscriptions and advanced operating procedures, contact the
corresponding facsimile information service.
Using the Receiver
1
Pick up the telephone receiver.
2
Select [Manual Receive] from the drop-down menu.
3
Specify the fax number of the facsimile information service.
z
The call destination can be specified using the numeric keypad, address numbers,
or one touch buttons. The address book cannot be used.
z
The call destination can be specified also with the keyboard displayed on the screen.
Pressing [More Characters] on the screen displays symbols.
Note • When the line type is set to a pulse line, [Tone (:)] does not appear.
• If you want to send tones (or to use the touch-tone services) while using a pulse line, select
[Tone (:)].
• Some touch-tone services may not be available even if you set your telephone to send
tones.
4
When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
5
When input is finished, press the <Start> button.
Note • The <Online> indicator on the control panel lights and reception begins.
6
Place the receiver back in the cradle.
Important • Make sure that the receiver is placed properly in the cradle. Otherwise, the line will remain
"busy".
To Next Page
Loading...
Need help?
General
