Layout Adjustment
233
Scan
5
Reduce/Enlarge (Specifying a Scanning Ratio)
This feature allows you to set the scanning ratio for the document to be scanned.
Note • When [Searchable Text] on the [File Format] screen is set to [Searchable], [Reduce/Enlarge]
is 100%.
1
Select [Reduce/Enlarge].
2
Select or enter a ratio.
îš„Proportional %
Select a preset ratio, or enter a value within the range of 25 to 400% in 1% increments.
To enter a value, touch the entry box, and then use the numeric keypad or the [ ] and
[ ] buttons.
You can change settings to display scanning ratios other than [100%]. For information on how to set,
refer to "5 Tools" > "Scan Service Settings" > "Reduce/Enlarge Presets" in the Administrator Guide.
îš„Enter Output Size
In [Output Size], select the output size of the
scanned document. The machine
automatically calculates the scanning ratio
based on the selected output size and the
original document size.
Note • Selecting [Auto %] may generate blank
margin areas.
îš„100 %
Scans at the same image size as the original
document.
îš„Proportional %
Selects from preset ratios.
To Next Page
Loading...
Need help?
General
