Fuji Xerox ApeosPort-3 C4400

Accessing Web Applications
273
Web Applications
9
Accessing Web Applications
To access web applications, follow the procedure below.
An access destination must be registered in advance.
For information on how to register an access destination, refer to "5 Tools" > "Web Applications Service
Setup" > "Server Setup" in the Administrator Guide.
1 Press the <All Services> button.
2 Select [Web Applications].
Note • If Auto Jump Destination has been set,
the machine can access the remote
service.
3 Select an access destination.
4 Select [Open] on the pop-up menu
displayed.
Open
Accesses the specified remote service.
Details
Displays the information of the specified
remote service.
Close Menu
Hides the pop-up menu.
123
456
789
0#
C
<All Services> button