Copy
67
Copy
3
îš„Copy Size
Allows you to enter the width and length of output copies, in the range of 1 to 999 mm
in 1 mm increments.
Paper Supply (Selecting the Paper for Copying)
This feature allows you to select the tray that holds the paper you want to use.
1
Select a paper tray.
îš„Auto Paper Select
Automatically determines the tray holding the appropriate paper, based on the
document size and the specified copy ratio.
Note • If you select [Auto Paper Select], specify an option other than [Auto %] in [Reduce/Enlarge].
îš„Trays (2nd to 5th Buttons)
Allows you to directly select the desired tray.
You can change the paper tray associated with each button. For information on the settings, refer to "5
Tools" > "Copy Service Settings" > "Copy Defaults" > "Paper Supply" in the Administrator Guide.
îš„More...
Displays the [Paper Supply] screen.
Refer to "[Paper Supply] Screen" (P.67)".
[Paper Supply] Screen
You can select a paper tray from all trays available on the machine.
1
Select a paper tray.
îš„Tray
Allows you to select a paper tray. When [Auto Paper] is selected, the machine
automatically determines the tray holding the appropriate paper based on the
document size and the specified copy ratio. When [Bypass] is selected, the [Tray 5
(Bypass)] screen is displayed.
Refer to "[Tray 5] Screen" (P.68).
To Next Page
Loading...
Need help?
General
