Fax
4
4 Fax
170
îš„Password
Enter the password using the numeric keypad. If a password has not been set, leave
this box blank.
Note • You can enter up to 20 digits for the password.
Private Polling (F Code Method)
1
Select the [More Options] tab to display the
[More Options] screen.
2
Select [Remote Polling].
3
Select [Poll a Remote Device].
4
Select [Save].
5
Select the [Fax/Internet Fax Options] tab to
display the [Fax/Internet Fax Options]
screen.
6
Select [F Code].
7
Select [On].
8
Select [F Code], and then enter the F Code
using the numeric keypad.
Note • You can enter up to 20 digits for the F
Code.
9
If necessary, select [Password], and then
enter a password using the numeric keypad.
Note • You can enter up to 20 digits for the
password.
îš„Off
Private Polling is not used.
îš„Poll a Remote Device
Private Polling is used.
Internet Fax Profile (Specifying Internet Fax Profiles)
A profile is specified to restrict attribute information such as image resolution and paper
size for transmissions between Internet Fax-compatible machines.
Note • This feature is not available for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• The profiles that can be processed differ depending on the Internet Fax-compatible machine
of the recipient. Before specifying a profile, confirm the profiles the Internet Fax-compatible
machine of the recipient can process.
• If inconsistency occurs between a profile, and stored document size and resolution, priority
is given to the settings specified in the profile.
• If the profile differs for each recipient when using Broadcast Send, the smallest size
becomes the maximum image size.
You can set an Internet Fax profile for each address number. For information on how to register address
numbers, refer to "5 Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
To Next Page
Loading...
Need help?
General
