7 Job Flow Sheets
256
Job Flow Sheets
7
Job Flow Procedure
Job flow sheets are categorized into two types according to the target. One type of job
flow sheets targets scanned documents, and the other type targets documents stored
in mailboxes. This chapter describes the first type of job flow sheets, targeting scanned
documents.
For details on the job flow sheets that target documents stored in mailboxes, refer to "Configuring/
Starting Job Flow" (P.249).
This section explains how to select a job flow sheet and execute the job flow. Refer to
the following sections for detailed steps.
To create and register a job flow sheet, use a personal computer.
Step 1 Opening the [Job Flow Sheets] Screen ..........................................................................256
Step 2 Selecting a Job Flow Sheet ............................................................................................257
Step 3 Confirming/Changing the Job Flow Sheet.....................................................................257
Step 4 Starting the Job Flow Sheet ...........................................................................................257
For information on how to create and register job flow sheets, refer to the manual stored on the CD-
ROM in the Driver CD Kit.
Step 1 Opening the [Job Flow Sheets] Screen
Follow the procedure below to open the [Job Flow Sheets] screen.
1
Press the
<All Se
rvices
> but
ton.
2
Select [Job Flow Sheets].
123
456
789
0#
C
<All Services> button
To Next Page
Loading...
Need help?
General
