Fax/Internet Fax Options
171
Fax
4
The default values of [Internet Fax Profile] can be changed in the System Administration mode. For
information on how to change the default values, refer to "5 Tools" > "Fax Service Settings" > "Fax
Defaults" > "Internet Fax Profile" in the Administrator Guide.
1
Select [Internet Fax Profile].
2
Select the profile.
îš„TIFF-S
This profile is the Internet Fax standard. For
documents that are larger than A4, the size is
reduced automatically to A4 for transmission.
z
Encoding method : MH
z
Stored Document Size : A4
z
Resolution : Standard, Fine
îš„TIFF-F
Select this profile when you specify super-fine for the resolution or when you send A3
or B4 documents.
z
Encoding method : MMR
z
Stored Document Size : A4, B4, A3
z
Resolution : Standard, Fine, Superfine (400 dpi), Superfine (600 dpi)
Note • When a fax is sent to a machine that does not support TIFF-F, the recipient machine will not
be able to display or print the images.
îš„TIFF-J
Select this profile for sending documents in JBIG.
z
Encoding method : JBIG
z
Stored Document Size : A4, B4, A3
z
Resolution : Standard, Fine, Superfine (400 dpi), Superfine (600 dpi)
Note • When a fax is sent to a machine that does not support TIFF-J, the recipient machine will not
be able to display or print the images.
Encryption (Sending Internet Fax Encrypted by S/MIME)
You can send Internet Fax encrypted by S/MIME.
When sending encrypted Internet Fax, select a recipient with a certificate that can be
encrypted from Address Book.
Note • This feature is supported only by the ApeosPort series.
îš„Off
Sends Internet Fax without encryption.
îš„On
Sends encrypted Internet Fax.
To Next Page
Loading...
Need help?
General
