Fax
4
4 Fax
136
Features Unavailable for Sending Internet Fax
The following features are available for regular fax transmission, but are not available
for Internet Fax transmission.
If you are using the fax gateway feature, you can set the communication mode and F code. For more
information on the fax gateway feature, refer to "Sending an Internet Fax to normal fax machines via a
relay station" (P.139).
Sending Internet Fax
The following explains the procedure to send Internet Fax.
Important • The CC, BCC, and Reply To features are not available for Internet Fax.
Note • The machine converts documents to the TIFF format and then sends them as e-mail
attachments.
1
Select [Internet Fax].
2
Select [New Recipients].
3
Specify a recipient by entering up to 128
characters with the keyboard displayed in
the touch screen.
Important • If you specify a fax number, the data will
not be sent.
Note • You can use address numbers, one touch
buttons, group dial numbers, or Address
Book to specify e-mail addresses. For
more information, refer to "Speed Dialing
(Specifying a Destination Using an
Address Number)" (P.146), "Specifying a Destination using a One Touch Button" (P.147),
and "Specifying a Destination Using the Address Book" (P.145).
4
Enter a subject and a message if necessary.
Screen Features
Fax/Internet Fax Options Starting Rate
Priority Send
Delay Start
Cover Page
Recipient Print Sets
F Code
Remote Mailbox
More Options Remote Polling
To Next Page
Loading...
