Handling Error Terminations
303
Job Status
11
Handling Error Terminations
This section describes how to handle error terminations.
For a Print Job
Select a job shown as an error termination in the [Completed Jobs] tab to check the
error code. Follow the error code instructions.
For information on error codes, refer to "14 Problem Solving" > "Error Code" in the Administrator
Guide.
For a Fax Job
A transmission report (undelivered) is printed.
For more information on transmission reports (undelivered), refer to "4 Machine Status" > "Machine
Information" > "Automatically Printed Reports/Lists" > "Transmission Report - Job Undelivered" in the
Administrator Guide. For details on how to print transmission reports (undelivered) automatically, refer
to "5 Tools" > "Common Service Settings" > "Reports" > "Scan File Transfer Report" in the
Administrator Guide.
For a Scan Job
A transmission report (undelivered) is printed.
For more information on transmission reports (undelivered), refer to "4 Machine Status" > Machine
Information" > "Automatically Printed Reports/Lists" > "Transmission Report - Job Undelivered" in the
Administrator Guide. For details on how to print transmission reports (undelivered) automatically, refer
to "5 Tools" > "Common Service Settings" > "Reports" > "Scan File Transfer Report" in the
Administrator Guide.
For Other Jobs
Print a Job History Report, and check the execution results.
For information about job history reports, refer to "5 Tools" > "Common Service Settings" > "Reports" >
"Job History Report" in the Administrator Guide.
When an error code is displayed in [Transmission Report - Job Undelivered] or [Job History Report],
refer to "14 Problem Solving" > "Error Code" in the Administrator Guide.
To Next Page
Loading...
