Output Format
97
Copy
3
Front Cover Quantity
Allows you to specify the number of blank sheets to be used as front covers. This
setting is displayed when [Blank Covers] is selected for [Front Cover].
Back Cover Quantity
Allows you to specify the number of blank sheets to be used as back covers. This
setting displayed when [Blank Covers] is selected for [Back Cover].
Transparency Options (Inserting Blank Sheets between Transparencies)
This feature allows you to insert blank separators between output transparency sheets.
At the same time, you can make copies for handouts.
Important • Using transparency sheets for color (V556/V558 [with white border]) may cause a
malfunction or paper jam.
Note • When loading A4 size transparencies on Tray 5 (bypass), we recommend loading them
vertically.
• Transparency sheets must be loaded in a tray in the same orientation as the paper to be
used for handouts and separators.
1
Select [Transparency Options].
2
Select any item.
No Transparency Separators
Does not insert separators.
Blank Transparency Separators
Inserts a separator each time a transparency is used for copying. Only one set of
copies can be made.
Blank Separators & Handouts
Inserts a separator each time a transparency is used for copying. At the same time, the
required number of copies is made for handouts.
Transparency Set & Handouts
Makes copies using transparencies. At the same time, the required number of copies
is made for handouts.
Paper Supply
Displays the [Paper Supply] screen. Select the tray to use.
When [Bypass...] is selected, the [Tray 5] screen appears. Refer to "[Tray 5] Screen" (P.68).
To Next Page
Loading...
