3 Copy
96
Copy
3
îš„Front Cover
Attaches a front cover to the copies.
z
No Covers
No cover is added.
z
Blank Covers
Blank sheets of paper are attached as front covers.
z
1 Sided Cover Side 1 Only
The first page of the document is copied on the front side of the front cover.
z
1 Sided Cover Side 2 Only
The first page of the document is copied on the back side of the front cover.
z
2 Sided Cover
The first and second pages of the document are copied on the front and back sides
of the front cover.
îš„Back Cover
Attaches a back cover to the copies.
z
No Covers
No back cover is attached.
z
Blank Covers
Blank sheets of paper are attached as back covers.
z
1 Sided Cover Side 1 Only
The first page of the document is copied on the front side of the back cover.
z
1 Sided Cover Side 2 Only
The first page of the document is copied on the back side of the back cover.
z
2 Sided Cover
The first and second pages of the document are copied on the front and back sides
of the back cover.
îš„Paper Supply
Displays the [Covers - Paper Supply] screen.
Allows you to set a tray. When you select trays for copying and make covers, the
orientation and size of paper loaded in the trays must be the same.
z
Front Cover Tray
Set the tray used for front covers.
z
Back Cover Tray
Set the tray used for back covers.
z
Main Body Tray
Set the tray used for the body pages of documents.
When [Bypass...] is selected, the [Tray 5] screen appears. For more information, refer to "[Tray 5]
Screen" (P.68).
Note • [Auto Size Detect] of [Tray 5] cannot be selected as [Covers Tray].
To Next Page
Loading...
Need help?
General
