Registering/Deleting/Renaming Stored Programs
267
Stored Programming
8
Assigning/Changing Icons for Stored Programs
The following is the procedure for assigning or changing an icon of a stored program.
12 icons are available.
1
Select [Assign/Change Icon].
2
Select the number to assign or change an
icon.
Note • Select [ ] to return to the previous
screen or [ ] to move to the next screen.
3
Select an icon, and select [Save].
No Icon
No icon is assigned to a registered stored
program.
Icon
Select an icon according to the content of the registered stored program.
To Next Page
Loading...
