Fuji Xerox ApeosPort-3 C4400

To Next Page

To Previous Page

307

Computer Operations

The following describes how to print with the machine by operating on a PC.

Print Features

The main print features of the machine are as follows:

To learn about print features, click [Help] on the print driver screen to see the print driver's online help.

For information on printing, refer to "Printing" (P.309).

Note • Some features are not available unless you perform optional component settings in the

[Printer] tab. The unavailable features are grayed out.

Multiple-Up

Prints multiple pages onto one sheet of paper.

2 Sided Printing

Prints data on both sides of paper.

Note • This feature does not appear for some models. To use the feature, an optional package is

necessary. For more information, contact our Customer Support Center.

Poster

Splits one page of print data into multiple sheets of paper and enlarges the printed

image to fit the size of each sheet. Used to create large posters, etc.

Booklet Creation

Performs 2-sided printing and page allocation for printing a booklet in the correct page

order. Only available when the machine has the 2-sided printing feature.

Note • This feature does not appear for some models. To use the feature, an optional package is

necessary. For more information, contact our Customer Support Center.

Transparency Separators

Automatically inserts a blank sheet of paper as a separator each time a transparency

is printed.

Watermark

Prints fixed text, such as "Confidential", over the print data.

Secure Print

Temporarily stores the print data on the machine, to print it with the print command from

the machine. This feature allows you to set a passcode, which is helpful to print

confidential documents.

For information on how to print, refer to "Secure Print" (P.291).

Sample Set

Before printing multiple sets of a document, you can first print one copy for trial, and

Related product manuals