2 Product Overview
40
Product Overview
2
îš„C-Finisher (optional) and C-Finisher with Booklet Maker (optional)
Note • C-Finisher and C-Finisher with Booklet Maker are optional. When an explanation refers
commonly to B-Finisher and C-Finisher, they are described as "Finisher".
No. Component Function
1 Front cover Open this cover when clearing paper jams, replacing or adding staples,
clearing staple jams, or throwing punch scraps.
2 Output tray Receives documents.
3 Exit cover Open this cover to access the insides of the machine to clear paper
jams.
4 Finisher tray Delivers stapled outputs.
5 Staple cartridge Contains staples. Draw out this cartridge when replacing or adding
staples, or clearing staple jams.
6 Booklet tray Documents are delivered here when Folding is selected in the booklet
creation function.
7 Booklet unit Folds and staples outputs.
8 Center tray (Front transport
cover)
Delivers copies and prints when they are unable to be delivered to the
output or finisher tray.
Pull the cover upward when clearing paper jams.
Note • Remove outputs delivered to the center tray constantly.
8
7
6
4
1
5
3
2
To Next Page
Loading...
Need help?
General
