Fuji Xerox ApeosPort-3 C4400 - Page 169

Fax/Internet Fax Options
167
Fax
4
Sending to Mailbox (DTMF Method)
To send a fax to a mailbox using the DTMF method, you need the mailbox number of
the destination mailbox. Two DTMF methods are available: Auto and Manual.
Sending to Mailbox (Fax Signal Method)
1 Select [Remote Mailbox] on the [Fax/Internet
Fax Options] screen.
2 Select [On].
Off
Disables the Remote Mailbox feature.
On
Enables the Remote Mailbox feature. Enter a
mailbox number into [Remote Mailbox
Number].
Remote Mailbox Number
Enter a 3-digit mailbox number using the numeric keypad.
Mailbox Passcode
Enter the 4-digit passcode of the remote mailbox using the numeric keypad. If a
passcode has not been set, leave this box blank.
Private Polling (Fax Signal Method)
1 Select [More Options] tab to display the
[More Options] screen.
2 Select [Remote Polling].
3 Select [Poll a Remote Device].
4 Select [Save].
5 Select the [Fax/Internet Fax Options] tab to
display the [Fax/Internet Fax Options]
screen.
6 Select [Remote Mailbox].
7 Select [On].
Off
Disables the Private Polling feature.
On
Enables the Private Polling feature. Enter a mailbox number into [Remote Mailbox
Number].
Remote Mailbox Number
Enter a 3-digit mailbox number using the numeric keypad.