5 Scan
196
Scan
5
îš„If you have more documents
If you have more documents to scan, select [Next Original] on the touch screen while
the current document is being scanned. This allows you to scan the documents as a
single set of data.
Up to 999 pages can be stored.
Note • If the number of document pages exceeds the maximum, then scanning stops. Follow the
displayed message, and either abort the operation, or save the scanned data.
2
While documents are being scanned, select
[Next Original].
Note • When using the document feeder, load the next document after the machine has finished
scanning the first document.
• When the screen shown above is displayed and no operation is performed for a certain
period of time, the machine automatically assumes that there are no more documents.
• You can change the scan settings of the next document by selecting the [Change Settings]
button that is displayed after selecting [Next Original].
3
Load the next document.
4
Press the <Start> button.
If you have more documents, repeat Steps 3 and 4.
5
When all documents have been scanned,
select [Last Original].
To Next Page
Loading...
Need help?
General
