Control Panel
47
Product Overview
2
10 <Interrupt> button Press this button to suspend a copy or print job in progress to have the
machine process another job. During the Interrupt mode, the <Interrupt>
button lights up. Pressing the <Interrupt> button again exits the Interrupt
mode and resumes the suspended job.
Some types of jobs cannot be executed in the Interrupt mode.
Refer to “15
Appendix” > “Notes and Restrictions” > “Notes and Restrictions in the Interrupt Mode”
in the Administrator Guide.
11 <Stop> button Press this button to stop the current copy job or communications.
12 <Start> button Press this button to start scanning a document.
13 Numeric keypad Use the numeric buttons on the keypad to enter the number of copies,
passwords and other numerical values.
14 <Speed Dial> button Press this button to specify a recipient with an address number when
sending a fax or e-mail.
15 <C (Clear)> button Press this button if you have entered a wrong numerical value with the
numeric keypad.
16 <Dial Pause> button Used to insert a pause into a destination number.
17 <Custom> buttons Press this button to call their associated features.
To the buttons, you can assign [Language] or any features displayed on
the [All Services] screen.
For how to assign features to the buttons, refer to “1 Before Using the Machine” >
“Customizing the Control Panel” > “Assigning Features to <Custom> Buttons” in the
Administrator Guide.
18
<All Services> button
Press this button to display the [All Services] screen.
You can change the features that appear on the [All Services] screen. For information,
refer to “1 Before Using the Machine” > “Customizing the Control Panel” >
“Customizing the [All Services] Screen” in the Administrator Guide.
19 One touch panels Contains one touch buttons.
Turn over the panels to display buttons 001 - 030, 031- 060 and 061-
070.
Buttons M01 to M20 are for stored programs. The buttons corresponds
to the stored jobs 01 to 20.
Note • The feature is not available for some models. An optional package
is necessary. For more information, contact our Customer Support
Center.
20 One touch buttons Allows you to specify a recipient with the simple press of a button. You
can use the buttons for fax and Internet Fax jobs.
The registered address numbers 001 to 070 can be specified with the
buttons.
Note • The feature is not available for some models. An optional package
is necessary. For more information, contact our Customer Support
Center.
No. Component Function
To Next Page
Loading...
Need help?
General
